Show Santap Vttbl Dvt - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show santap vttbl dvt

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show santap vttbl dvt
To display the SANTap VTTBL DVT configuration on the Storage Service Module (SSM), use the show
santap vttbl dvt command in the EXEC mode.
Syntax Description vttbl
dvt
dvt-pwwn
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(1b)
Usage Guidelines None.
Examples The following example displays the SANTap VTTBL DVT configuration.
switch# show santap vttbl dvt 50:00:1f:e1:50:0c:3b:09
DVT Entry
Related Commands Command
show santap vttbl
Cisco MDS 9000 Family Command Reference
22-362
show santap vttbl dvt {dvt-pwwn}
Displays SANtap VTTBL configuration.
Displays SANtap DVT configuration.
Displays the DVT port world wide name (PWWN).
Modification
This command was introduced.
:
Activated : FALSE
Number LUNs : 16
Possible Hosts :
hi_pwwn = 10:00:00:00:c9:3f:90:21 : 4 LUNs
hi_pwwn = 10:00:00:00:c9:4c:c0:e5 : 2 LUNs
hi_pwwn = 21:00:00:e0:8b:0c:7d:21 : 2 LUNs
hi_pwwn = 10:00:00:00:c9:56:ed:f2 : 2 LUNs
hi_pwwn = 50:06:0b:00:00:60:2a:a0 : 4 LUNs
hi_pwwn = 21:00:00:e0:8b:92:62:92 : 2 LUNs
Description
Displays the SANTap VTTVL configuration.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x