Show Rmon - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example displays the configured high-capacity RMON alarms.
switch# show rmon hcalarms
High Capacity Alarm 1 is active, owned by cseSysCPUUtilization.0@test
Monitors 1.3.6.1.4.1.9.9.305.1.1.1.0 every 10 second(s)
Taking absolute samples, last value was 0
Rising threshold is 60, assigned to event 4
Falling threshold is 59, assigned to event 4
On startup enable rising alarm
Number of Failed Attempts is 0
The following example displays the RMON event log located on the switch.
switch# show rmon logs
Event 4
Event 5
Related Commands Command
rmon alarm
rmon event
rmon hcalarm
show snmp host
OL-18089-01, Cisco MDS NX-OS Release 4.x
1 WARNING(4)Falling alarm 1, fired at 0 days 0:02:23 uptime
iso.3.6.1.4.1.9.9.305.1.1.1.0=17 <= 59
1 INFORMATION(5)Startup Falling alarm 1, fired at 0 days 0:02:23 uptime
iso.3.6.1.4.1.9.9.305.1.1.1.0=17 <= 59
2 INFORMATION(5)Falling alarm 1, fired at 0 days 0:02:33 uptime
iso.3.6.1.4.1.9.9.305.1.1.1.0=17 <= 59
Description
Configures the 32-bit RMON alarm.
Configures an RMON event.
Configures the 64-bit RMON alarm.
Displays the SNMP trap destination information.
Cisco MDS 9000 Family Command Reference

show rmon

22-343