Debug Xbar; Debug Xbar_Driver - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug xbar_driver

To enable debugging of the crossbar driver (XBAR driver), use the debug xbar_driver command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description error
flow
trace
Defaults
Enabled.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples
The following example displays the system output when the debug xbar_driver command is issued:
switch# debug xbar_driver error
switch# 2006 Jan 23 22:02:41.770329 xbar_driver:
2006 Jan 23 22:03:41.780356 xbar_driver:
2006 Jan 23 22:04:41.780356 xbar_driver:
2006 Jan 23 22:05:41.780357 xbar_driver:
2006 Jan 23 22:06:41.780356 xbar_driver:
2006 Jan 23 22:07:41.780359 xbar_driver:
2006 Jan 23 22:08:41.790341 xbar_driver:
Related Commands Command
no debug all
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug xbar {error | flow | trace}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging of XBAR driver errors.
Enables debugging of the XBAR driver flow.
Enables debugging of the XBAR driver trace.
sc_stats_timer_hdlr
sc_stats_timer_hdlr
sc_stats_timer_hdlr
sc_stats_timer_hdlr
sc_stats_timer_hdlr
sc_stats_timer_hdlr
Cisco MDS 9000 Family Command Reference
sc_stats_timer_hdlr called
called
called
called
called
called
called...
debug xbar_driver
6-133