Radius Commit - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 20 R Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

radius commit

To apply the pending configuration pertaining to the RADIUS Cisco Fabric Services (CFS) distribution
session in progress in the fabric, use the radius commit command in configuration mode.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples The following example shows how to apply a RADIUS configuration to the switches in the fabric.
switch# config terminal
switch(config)# radius commit
Related Commands Command
radius distribute
show radius
OL-18089-01, Cisco MDS NX-OS Release 4.x
radius commit
Modification
This command was introduced.
Description
Enables CFS distribution for RADIUS.
Displays RADIUS CFS distribution status and other details.
Cisco MDS 9000 Family Command Reference
radius commit
20-3