File - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 8 F Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

file

To access FICON configuration files in a specified VSAN, use the file command. To disable the feature
or to revert to factory defaults, use the no form of the command.
Syntax Description file file-name
Defaults
None.
Command Modes FICON configuration submode.
Command History Release
1.3(1)
Usage Guidelines
The configuration file submode allows you to create and edit FICON configuration files. If a specified
file does not exist, it is created. Up to 16 files can be saved. Each file name is restricted to 8 alphanumeric
characters.
Examples
The following example accesses the FICON configuration file called IplFile1 for VSAN 2. If this file
does not exist, it is created.
switch# config terminal
switch(config)# ficon vsan 2
switch(config-ficon)# file IplFile1
switch(config-ficon-file)#
The following example deletes a previously-created FICON configuration file.
switch(config-ficon)# no file IplFileA
Related Commands Command
ficon vsan
show ficon
OL-18089-01, Cisco MDS NX-OS Release 4.x
file file-name
no file file-name
Creates or accesses the FICON configuration file in the specified VSAN
Modification
This command was introduced.
Description
Enable FICON for a VSAN.
Displays configured FICON details.
Cisco MDS 9000 Family Command Reference
file
8-75