Show Fcfwd - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show fcfwd

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fcfwd
To display the configured fcfwd tables and statistics, use the show fcfwd command.
Syntax Description idxmap
interface-to-port
port-to-interface
statistics
pcmap
interface
sfib
multicast
statistics
unicast
spanmap
rx
tx
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays fcfwd SPAN map receive information:
switch# show fcfwd spanmap rx
SPAN source information: size [c8]
dir source
Cisco MDS 9000 Family Command Reference
22-102
show fcfwd {idxmap [interface-toport | port-to-interface | statistics] | pcmap [interface] | sfib
[multicast | statistics | unicast] | spanmap [rx | tx]}
Displays the FC forward index tables.
Displays the interface index to port index table.
Displays the port index to interface index table.
Displays index table statistics.
Displays the FC forward PortChannel table.
Displays PortChannel tables for an interface.
Displays software forwarding tables.
Displays multicast software forwarding tables.
Displays software forwarding statistics.
Displays unicast software forwarding tables.
Displays SPAN map tables.
Displays SPAN map tables in the ingress -rx direction.
Displays SPAN map tables in the egress -tx direction.
Modification
This command was introduced.
vsan bit drop_thresh destination
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x