Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1385

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show port-monitor
To configure the counter details of the policy, use the show port-monitor command.
Syntax Description
name
Defaults None.
Command Modes Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines The show port-monitor command can also take a string name of policy and displays the details of that
policy only.
Examples The following example shows how to display the counter details of the policy.
switch# show port-monitor cisco
Policy Name : cisco Status : Not Active
Port type : All Ports
Counter Threshold Interval Rising Threshold Falling Threshold Status
------- --------- -------- ---------------- ------------------ ------
Link Loss Delta 60 5 1 Active
Sync Loss Delta 60 5 1 Active
Protocol Error Delta 60 1 0 Active
Signal Loss Delta 60 5 1 Active
Invalid Words Delta 60 1 0 Active
Invalid CRC's Delta 263635064 3 4 Active
RX Performance Delta 60 2147483648 524288000 Active
TX Performance Delta 60 2147483648 524288000 Active
State Change Delta 60 1 0 Active
-------------------------------------------------------------------------------
switch#
Related Commands Command
show port-monitor
OL-18089-01, Cisco MDS NX-OS Release 4.x
show port-monitor [name]
Modification
This command was introduced.
Description
Shows port monitor policies.
Displays a policy name.
Cisco MDS 9000 Family Command Reference
show port-monitor
22-317