Npv Auto-Load-Balance Disruptive - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 16 N Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

npv auto-load-balance disruptive

To enable autoload balance disruptive, use the npv auto-load-balance disruptive command in
configuration mode. To disable this feature, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History Release
3.3(1)
Usage Guidelines None.
Examples
The following example shows how to enable autoload balance disruptive.
switch(config)# npv auto-load-balance disruptive
Enabling this feature may flap the server intefaces whenever load is not in a ba
lanced state. This process may result in traffic disruption. Do you want to proc
eed? (y/n):
Please enter y or n y
switch(config)#
Related Commands Command
npv traffic-map server
interface
OL-18089-01, Cisco MDS NX-OS Release 4.x
npv auto load-balancing disruptive
no npv auto load-balancing disruptive
Modification
This command was introduced.
Description
Configures server interface traffic enginering.
npv auto-load-balance disruptive
Cisco MDS 9000 Family Command Reference
16-9