Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 491

Chapter 7 E Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
end
To exit any of the configuration modes and return to EXEC mode, use the end command in configuration
mode.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
Configuration mode.
Command History Release
4.1(1b)
1.0(2)
Usage Guidelines
You can also press Ctrl-Z to exit configuration mode.
Examples The following example shows how to exit from configure mode:
switch(config-port-monitor)# end
switch#
The following example changes the name to george. Entering the end command causes the system to
exit configuration mode and return to EXEC mode.
switch(config)# hostname george
george(config)# end
switch#
Related Commands Command
exit
OL-18089-01, Cisco MDS NX-OS Release 4.x
end
Modification
Modified the command output.
This command was introduced.
Description
Exits configuration mode, or any of the configuration modes.
Cisco MDS 9000 Family Command Reference
end
7-5