Show Santap Module Dvtlun - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show santap module dvtlun

To display the SANTap DVTLUN configuration on the Storage Service Module (SSM), use the show
santap module dvt lun command in the EXEC mode.
Syntax Description slot
brief
dvt-pwwn
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(1b)
Usage Guidelines None.
Examples The following example displays the SANTap DVTLUN configuration:
switch# show santap module 2 dvtlun
DVT LUN Information :
Related Commands Command
show santap vttbl
OL-18089-01, Cisco MDS NX-OS Release 4.x
show santap module slot dvtlun {brief | dvt-pwwn}
Specifies the module number. The range is from 1 to 9.
Displays SANTap DVTLUN configuration in a brief format.
Displays the DVT port world wide name (PWWN).
Modification
This command was introduced.
dvt pwwn = 22:00:00:20:37:88:20:ef
dvt lun = 0x0
xmap id = 8
dvt id = 3
dvt mode = 0
dvt vsan = 3
tgt pwwn = 22:00:00:20:37:88:20:ef
tgt lun = 0x0
tgt vsan = 1
Description
Displays the SANTap VTTBL configuration.
show santap module dvtlun
Cisco MDS 9000 Family Command Reference
22-361