Show Flogi Database Interface - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show flogi database interface

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show flogi database interface
To list all the FLOGI sessions through all of the interfaces, use the show flogi database interface
command.
Syntax Description fa slot/port
fc slot/port
fv module-number
port-channel
port-channel number
details
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(3)
Usage Guidelines None.
Examples The following example shows how to display the PortChannel FCID allocation details:
switch# show flogi database interface port-channel 1 details
No flogi sessions found.
switch#
Related Commands Command
show fcns database
Cisco MDS 9000 Family Command Reference
22-146
show flogi database interface {fa slot/port | fc slot/port | fv module-number | port-channel
port-channel number details}
Specifies the FA port interface to configure by slot and port number on all
switches.
Specifies the Fibre Channel interface to configure by slot and port number
on an MDS 9000 Family switch.
Specifies the Fibre Channel virtualization interface by module on all
switches.
Specifies the PortChannel interface.
Specifies the PortChannel number. The range is from 1 to 256.
Specifies FCID allocation details.
Modification
This command was introduced.
Description
Displays all the local and remote name server entries.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x