Show Ntp - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show ntp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example displays the NTP IO statistics.
switch# show ntp statistics io
time since reset:
receive buffers:
free receive buffers: 9
used receive buffers: 9
low water refills:
dropped packets:
ignored packets:
received packets:
packets sent:
packets not sent:
interrupts handled:
received by int:
The following example displays the NTP local statistics.
switch# show ntp statistics local
system uptime:
time since reset:
bad stratum in packet:
old version packets:
new version packets:
unknown version number: 0
bad packet format:
packets processed:
bad authentication:
The following example displays the NTP memory statistics information.
switch# show ntp statistics memory
time since reset:
total peer memory:
free peer memory:
calls to findpeer:
new peer allocations: 0
peer demobilizations: 0
hash table counts:
The following example displays the NTP peer statistics information using the IP address of the peer.
switch# show ntp statistics peer ipaddr 10.1.1.1
The following example displays the NTP peer statistics information using the name of the peer.
switch# show ntp statistics peer name Peer1
The following example displays the NTP timestamp status information.
switch# show ntp timestamp-status
Linecard 9 does not support Timestamp check.
Related Commands Command
ntp
Cisco MDS 9000 Family Command Reference
22-290
11152
9
0
0
0
3
2
0
3
3
11166
11166
0
4
0
0
0
0
11475
15
15
0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
Description
Configures NTP parameters.
0 0 0
0 0 0
0 0 0
0 0 0
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands