Snmp-Server Enable Traps Zone - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

snmp-server enable traps zone

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
snmp-server enable traps zone
To enable SNMP zone traps, use the snmp-server enable traps zone command in configuration mode.
To disable zone trap, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines None.
Examples
The following example shows how to enable SNMP zone traps.
switch# config t
switch(config)# snmp-server enable traps zone
switch(config)#
switch(config)# no snmp-server enable traps zone
switch(config)#
Related Commands Command
show snmp
show snmp trap
Cisco MDS 9000 Family Command Reference
21-50
snmp-server enable traps zone
no snmp-server enable traps zone
Modification trap
This command was introduced.
Description
Displays SNMP information.
Displays SNMP traps.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x