Sdv Enable - Cisco MDS 9000 series Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

sdv enable

To enable SDV on the switch, use the sdv enable command in configuration mode. To disable SDV, use
the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
3.1(2)
Usage Guidelines
None.
Examples
The following example shows how to enable SDV.
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# sdv enable
The following example shows how to disable SDV.
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# no sdv enable
Related Commands Command
show sdv database
show vritual-device
OL-8413-07, Cisco MDS SAN-OS Release 3.x
sdv enable
no sdv enable
Modification
This command was introduced.
Description
Displays the SDV database.
Displays the virtual devices.
Cisco MDS 9000 Family Command Reference
sdv enable
21-15