Port-Monitor Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

port-monitor enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
port-monitor enable
To enable the user to activate or deactivate policies, use the port-monitor enable command. To disable
port monitor policies, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines None.
Examples
The following example shows how to enable port monitor:
switch(config)# port-monitor enable
switch(config)# no port-monitor enable
Related Commands Command
show port-monitor
Cisco MDS 9000 Family Command Reference
18-18
port-monitor enable
no port-monitor enable
Modification
This command was introduced.
Description
Displays all port monitor policies.
Chapter 18 P Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x