Chapter 15 M Command - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

match
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
match
To configure QoS class map match criteria, use the match command in class map configuration
submode. Remove QoS class map match criteria, use the no form of the command.
Syntax Description
any
destination-address fc-id
mask address-mask
destination-device-alias name Specifies the destination device alias to match frames. Maximum
destination-wwn wwn-id
input-interface fc slot/port
source-address fc-id
source-device-alias name
source-wwn wwn-id
Defaults
None.
Command Modes
Class map configuration submode.
Command History Release
1.3(1)
2.0(x)
Usage Guidelines You can access this command only if you enable the QoS data traffic feature using the qos enable
command.
Examples
The following example creates a class map called MyClass1 and places you in the class map
configuration submode to match any (default) criteria specified for this class:
switch# config terminal
Cisco MDS 9000 Family Command Reference
15-2
match {any | destination-address fc-id [mask address-mask] | destination-device-alias name |
destination-wwn wwn-id | input-interface fc slot/port | source-address fc-id [mask
address-mask] | source-device-alias name | source-wwn wwn-id}
no match {any | destination-address fc-id [mask address-mask] | destination-device-alias name
| destination-wwn wwn-id | input-interface fc slot/port | source-address fc-id [mask
address-mask] | source-device-alias name | source-wwn wwn-id}
Modification
This command was introduced.
Added the destination-device-alias and source-device-alias options.
Enables matching of any frame.
Specifies the destination FCID to match frames.
Specifies an address mask to match frames. The range is 0x0 to
0xffffffff.
length is 64 characters.
Specifies the destination WWN to match frames.
Specifies the source Fibre Channel interface to match frames.
Specifies the source FCID to match frames.
Specifies the source device alias to match frames. Maximum length
is 64 characters.
Specifies the source WWN to match frames.
Chapter 15 M Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x