Show Scheduler - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show scheduler

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show scheduler
To display command scheduler information, use the show scheduler command.
Syntax Description
config
job
name jobname
logfile
schedule
name schedulename
Defaults None.
Command Modes
EXEC mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, the command scheduler must be enabled using the scheduler enable command.
Examples The following example shows how to display the job information:
switch# show scheduler job name test_1
Job Name: test_1
----------------
config t
.81@ptEFACadmiQSAp8config t c====================================
===========================
switch#
The following example displays the command scheduler configuration information.
switch# show scheduler config
config terminal
scheduler enable
end
The following example displays the command scheduler schedule information.
switch# show scheduler schedule configureVsan99
Schedule Name : configureVsan99
Cisco MDS 9000 Family Command Reference
22-364
show scheduler {config | job [name jobname] | logfile | schedule [name schedulename]}
Displays command scheduler configuration information.
Displays job information.
Restricts the output to a specific job name. Maximum length is 31
characters.
Displays the log file.
Displays schedule information.
Restricts the output to a specific schedule name. Maximum length is 31
characters.
Modification
This command was introduced.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x