Show Install All Status - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show install all status

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Extracting "loader" version from image bootflash:/b-1.3.0.104.
-- SUCCESS
switch# show install all status
This is the log of last installation.
Verifying image bootflash:/b-1.3.0.104
-- SUCCESS
Verifying image bootflash:/i-1.3.0.104
-- SUCCESS
Extracting "system" version from image bootflash:/i-1.3.0.104.
-- SUCCESS
Extracting "kickstart" version from image bootflash:/b-1.3.0.104.
-- SUCCESS
Extracting "loader" version from image bootflash:/b-1.3.0.104.
-- SUCCESS
Use the show install all status command to view the output of a nondisrtuptive software upgrade process
on the Cisco MDS 9124 Fabric Switch.
switch# show install all status
This is the log of last installation.
Continuing with installation process, please wait.
The login will be disabled until the installation is completed.
Status for linecard upgrade.
-- SUCCESS
Performing supervisor state verification.
-- SUCCESS
Install has been successful.
Cisco MDS 9000 Family Command Reference
22-162
Chapter 22
<<<<<< log of last install
OL-18089-01, Cisco MDS NX-OS Release 4.x
Show Commands