Port-Security - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

port-security

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
port-security
To configure port security features and reject intrusion attempts, use the port-security command in
configuration mode. Use the no form of the command to negate the command or revert to factory
defaults.
Syntax Description
activate
auto-learn
database
any-wwn
nwwn wwn
pwwn wwn
swwn wwn
fwwn wwn
interface
fc slot/port
port-channel number
vsan vsan-id
force
no-auto-learn
Defaults
Disabled.
Command Modes Configuration mode.
Cisco MDS 9000 Family Command Reference
18-20
port-security
{activate vsan vsan-id [force | no-auto-learn] |
auto-learn vsan vsan-id |
database vsan vsan-id {any-wwn | pwwn wwn | nwwn wwn | swwn wwn} [fwwn wwn |
interface {fc slot/port | port-channel number} | swwn wwn [interface {fc slot/port |
port-channel number}]]}
no port-security
{activate vsan vsan-id [force | no-auto-learn] |
auto-learn vsan vsan-id |
database vsan vsan-id {any-wwn | pwwn wwn | nwwn wwn | swwn wwn} [fwwn wwn |
interface {fc slot/port | port-channel number} | swwn wwn [interface {fc slot/port |
port-channel number}]]}
Activates a port security database for the specified VSAN and automatically
enables auto-learn.
Enables auto-learning for the specified VSAN.
Enters the port security database configuration mode for the specified
VSAN.
Specifies any WWN to login to the switch.
Specifies the node WWN as the Nx port connection.
Specifies the port WWN as the Nx port connection.
Specifies the switch WWN as the xE port connection.
Specifies a fabric WWN login.
Specifies the device or switch port interface through which each device is
connected to the switch.
Specifies a Fibre Channel interface by the slot and port.
Specifies a PortChannel interface. The range is 1 to 128.
Specifies the VSAN ID. The range is 1 to 4093.
Forces the database activation.
Disables the autolearn feature for the port security database.
Chapter 18 P Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x