Ip Name-Server - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ip name-server

To configure a name server, use the ip name-server command in configuration mode. To disable this
feature, use the no form of the command.
Syntax Description ip-address
Defaults
None.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
You can configure a maximum of six servers. By default, no server is configured.
Examples
The following example configure a name server with an IP address of 1.1.1.4:
switch# config terminal
switch(config)# ip name-server 209.165.200.226
The following example specifies the first address (15.1.0.1) as the primary server and the second address
(15.2.0.0) as the secondary sever:
switch(config)# ip name-server 209.165.200.226 209.165.200.227
The following example deletes the configured server(s) and reverts to factory default:
switch(config)# no ip name-server
Related Commands Command
show ip route
OL-18089-01, Cisco MDS NX-OS Release 4.x
ip name-server ip-address
no ip name-server ip-address
Specifies the IP address for the name server.
Modification
This command was introduced.
Description
Displays the IP address of the default gateway.
Cisco MDS 9000 Family Command Reference
ip name-server
11-55