Show Hardware - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show hardware

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show hardware
To display switch hardware inventory details, use the show hardware command.
Syntax Description
ipc-channel status
Defaults None.
Command Modes EXEC mode.
Command History Release
1.2(1)
NX-OS 4.1(1b)
Usage Guidelines
None.
Examples The following example displays the switch hardware inventory details.
switch# show hardware
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS:
loader:
kickstart: version 4.0(3) [gdb]
system:
BIOS compile time:
kickstart image file is: bootflash:/n7000-s1-kickstart.4.0.3.gbin.S17
kickstart compile time:
system image file is:
system compile time:
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")
Intel(R) Xeon(R) CPU
Cisco MDS 9000 Family Command Reference
22-150
show hardware [ipc-channel status]
Displays the status of the interprocess communication (IPC) channels.
Modification
This command was introduced.
Changed the command output from SAN-OS to NX-OS.
version 3.17.0
version N/A
version 4.0(3) [gdb]
03/23/08
7/24/2008 12:00:00 [07/28/2008 03:28:06]
bootflash:/n7000-s1-dk9.4.0.3.gbin.S17
7/24/2008 12:00:00 [07/28/2008 04:10:26]
with 2063436 kB of memory.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x