Boot Enable-Break - Cisco Catalyst 3560-X Command Reference Manual

boot enable-break

boot enable-break
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Note
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-72
Downloaded from www.Manualslib.com
Use the boot enable-break global configuration command on a standalone switch to enable interrupting
the automatic boot process. Use the no form of this command to return to the default setting.
boot enable-break
no boot enable-break
This command has no arguments or keywords.
Disabled. The automatic boot process cannot be interrupted by pressing the Break key on the console.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
This command works properly only from a standalone switch in a stack.
When you enter this command, you can interrupt the automatic boot process by pressing the Break key
on the console after the flash file system is initialized.
Despite the setting of this command, you can interrupt the automatic boot process at any time by pressing
the MODE button on the switch front panel.
This command changes the setting of the ENABLE_BREAK environment variable. For more
information, see Appendix A "Catalyst 3750-X and 3560-X Switch Boot Loader Commands."
Command Description
show boot Displays the settings of the boot environment variables.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02