Debug Ttyd - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug ttyd

To enable TTYD debugging, use the debug ttyd command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description all
errors
events
Defaults
Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples
The following example displays the system output when the debug ttyd events command is issued:
switch# debug ttyd events
Related Commands Command
no debug all
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug ttyd {all | errors | events}
no debug ttyd {all | errors | events}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for all TTYD features.
Enables debugging for TTYD error conditions.
Enables debugging for TTYD events.
Cisco MDS 9000 Family Command Reference
debug ttyd
6-123