Show Port-Channel Database - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
15. port-security active bindings
Members must all be permitted by the activated port-security bindings and
fabric-bindings in all the allowed VSANs.
16. FC receive buffer size
Members must have the same fc receive buffer size. If the configured
receive buffer size is not compatible with the port capability then the
port will be error disabled
17. IP ACLs
Members must not have IP ACLs configured individually on them. This only
applies to ethernet port-channel.
18. sub interfaces
Members must not have sub-interfaces.
19. Access VLAN
Members must have same Access VLAN configured.
20. Native VLAN
Members must have same Native VLAN configured.
21. Duplex Mode
Members must have same Duplex Mode configured.
22. Ethernet Layer
Members must have same Ethernet Layer (switchport/no-switchport) configured.
23. Span Port
Members cannot be SPAN ports.
The following example displays the PortChannel database.
switch# show port-channel database
port-channel 2
The show port-channel consistency command has two options—without detail and detail.
Command Without Details
switch# show port-channel consistency
Database is consistent
switch#
Command With Details
switch# show port-channel consistency detail
Authoritative port-channel database:
================================================
OL-18089-01, Cisco MDS NX-OS Release 4.x
Administrative channel mode is on
Operational channel mode is on
Last membership update succeeded
First operational port is fc2/2
1 port in total, 1 port up
Ports: fc2/2 [up]
Cisco MDS 9000 Family Command Reference
show port-channel
22-301