Show Santap Vttbl Dvt; Show Santap Vttbl Dvt Host - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show santap vttbl dvt host

To display the SANTap VTTBL DVT host configuration on the Storage Service Module (SSM), use the
show santap vttbl dvt host command in the EXEC mode.
Syntax Description dvt-pwwn
host pwwn
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(1b)
Usage Guidelines None.
Examples The following example displays the SANTap VTTBL DVT host configuration:
switch# show santap vttbl dvt 50:00:1f:e1:50:0c:3b:09 host 10:00:00:00:c9:3f:90:21
HI-LIST Entry
Related Commands Command
show santap vttbl
OL-18089-01, Cisco MDS NX-OS Release 4.x
show santap vttbl dvt {dvt-pwwn} host {host-pwwn}
Displays the DVT port world wide name (PWWN).
Displays the host PWWN.
Modification
This command was introduced.
:
State
UA Power On
FIT Created
NVP Index
HI-LUNS Entry :
Number of LUNs
DVT ID
HI Index
LUNs Installed
Target Lun, DVT Lun pairs :
(0, 0)(1, 1)(2, 2)(3, 3)
Description
Displays the SANTap VTTBL configuration.
: PRLI
: 1
: 1
: 0x10000000c93f9021
: 4
: 0x83f978c
: 0
: TRUE
Cisco MDS 9000 Family Command Reference
show santap vttbl dvt host
22-363