Show Ipv6 Neighbours - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show ipv6 neighbours

To display IPv6 neighbors configuration information, use the show ipv6 neighbours command.
Syntax Description
interface
gigabitethernet
slot/port
mgmt 0
vsan vsan-id
Defaults
None.
Command Modes
EXEC mode.
Command History Release
3.1(0)
Usage Guidelines None.
Examples The following example displays information about IPv6 neighbor discovery.
switch# show ipv6 neighbours gigabitethernet 2/1
IPv6 Address
2001:0DB8:0:4::2
FE80::XXXX:A0FF:FED6:141E
2001:0DB8:1::45a
Related Commands Command
ipv6 nd
OL-18089-01, Cisco MDS NX-OS Release 4.x
show ipv6 neighbours [interface {gigabitethernet slot/port | mgmt 0 | vsan vsan-id}]
Displays the IP interface status and configuration.
Displays a Gigabit Ethernet interface slot and port number.
Displays the management interface.
Displays an IPFC VSAN interface and specifies the VSAN ID. The range is
1 to 4093
Modification
This command was introduced.
Description
Configures IPv6 neighbor discovery commands.
Age Link-layer Addr State Interface
0 0003.a0d6.141e REACH Ethernet2
0 0003.a0d6.141e REACH Ethernet2
- 0002.7d1a.9472 REACH Ethernet2
Cisco MDS 9000 Family Command Reference
show ipv6 neighbours
22-201