Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1356

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

The following example uses the show module, show port index-allocation, and show module

recovery-steps commands to display a Generation 1 module that is powered down because of alignment,

even though contiguous indices 208 through 252 are available.

switch# show module

switch# show port index-allocation

Module index distribution:

------------------------------------------------------+

Slot | Allowed |

-----|---------|-------|------------------------------|

switch# show module 9 recovery-steps

Failure Reason:

Contiguous and aligned indices unavailable for Generation-1 modules

Check "show port index-allocation" for more details

Recovery Steps:

Please follow the steps below:

1. Power off module in ANY ONE of the slots: 1, 4

2. Power on failed module in slot 9 and wait till it comes online

3. Power on the module that was powered off in step 1 and wait till it comes

4. Do "copy running-config startup-config" to save this setting

Cisco MDS 9000 Family Command Reference

-------------------------------- ------------------ ------------

1/2/4 Gbps FC Module

Supervisor/Fabric-2

1/2/4 Gbps FC Module

1/2 Gbps FC Module

Power-Status

Power Down Reason

------------

---------------------------

Insufficient resources (dest Index)

Alloted indices info

DS-X9530-SF2-K9

Index values

Show Commands

OL-18089-01, Cisco MDS NX-OS Release 4.x