Chapter 7
E Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
event manager policy
To register and activate an Embeded Event Manager policy (EEM) script policy, use the event manager
policy command.
Syntax Description
policy-script
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
NX-OS 4.1(3)
Usage Guidelines
The EEM schedules and runs policies on the basis of an event specification that is contained within the
policy itself. When the event manager policy command is invoked, the EEM examines the policy and
registers it to be run when the specified event occurs.
Examples
The following example shows how to register a policy:
switch# configure terminal
switch(config)# event manager policy modulescript
switch(config)#
Related Commands
Command
event manager applet
OL-18089-01, Cisco MDS NX-OS Release 4.x
event manager policy policy-script
no event manager policy policy-script
Specifies the EEM policy script. This name becomes the name of the EEM
policy. The maximum size is 29 characters.
Modification
This command was introduced.
Description
Displays an applet with the Emedded Event manager.
Cisco MDS 9000 Family Command Reference
event manager policy
7-15