Show Fcns Database - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show fcns database

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fcns database
To display the results of the discovery, or to display the name server database for a specified VSAN or
for all VSANs, use the show fcns database command.
Syntax Description detail
vsan vsan-id
domain domain-id
fcid fcid-id
local
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(3)
1.2(2)
Usage Guidelines The discovery can take several minutes to complete, especially if the fabric is large or if several devices
are slow to respond.
Virtual enclosure ports can be viewed using the show fcns database command.
Examples
The following example displays the contents of the FCNS database:
switch# show fcns database
VSAN 1:
--------------------------------------------------------------------------
FCID
--------------------------------------------------------------------------
0x020101
0x020102
0x0205d4
0x0205d5
0x0205d6
0x0205d9
0x0205da
0x0205dc
0x0205e0
0x0205e1
Cisco MDS 9000 Family Command Reference
22-112
show fcns database {detail [vsan vsan-id] | domain domain-id [detail] [vsan vsan-range] |
fcid fcid-id [detail] vsan vsan-range | local [detail] [vsan vsan-range] | vsan vsan-id}
Displays all objects in each entry.
Displays entries for a specified VSAN ID. The range is 1 to 4093.
Displays entries in a domain.
Displays entry for the given port.
Displays local entries.
Modification
Changed the command output for show fcns database detail.
This command was introduced.
TYPE PWWN
N 22:04:00:05:30:00:35:e1 (Cisco)
N 22:02:00:05:30:00:35:e1 (Cisco)
NL 21:00:00:04:cf:da:fe:c6 (Seagate)
NL 21:00:00:04:cf:e6:e4:4b (Seagate)
NL 21:00:00:04:cf:e6:21:ac (Seagate)
NL 21:00:00:04:cf:e6:19:9b (Seagate)
NL 21:00:00:04:cf:e6:19:62 (Seagate)
NL 21:00:00:04:cf:e6:e9:82 (Seagate)
NL 21:00:00:04:cf:e6:21:06 (Seagate)
NL 21:00:00:04:cf:e6:e0:eb (Seagate)
(VENDOR) FC4-TYPE:FEATURE
scsi-fcp:init isc..w <--iSCSI
scsi-fcp:init isc..w initiator
scsi-fcp:target
scsi-fcp:target
scsi-fcp:target
scsi-fcp:target
scsi-fcp:target
scsi-fcp:target
scsi-fcp:target
scsi-fcp:target
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands