Fcalias Clone - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 8 F Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

fcalias clone

To clone a Fibre Channel alias, use the fcalias clone command.
Syntax Description
origFcalias-Name
cloneFcalias-Name
vsan
vsan-id
Defaults None.
Command Modes
Configuration mode.
Command History Release
2.1(1a)
Usage Guidelines To disable an FC alias, use the no form of the fcalias name command.
Examples The following examples show how to clone a fcalias named origAlias to cloneAlias on VSAN 45.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# fcalias clone origAlias cloneAlias vsan 45
Related Commands Command
show fcalias
OL-18089-01, Cisco MDS NX-OS Release 4.x
fcalias clone origFcalias-Name cloneFcalias-Name vsan vsan-id
Clones a Fibre Channel alias from the current name to a new name.
Maximum length of names is 64 characters.
The clone Fibre Channel alias is for a VSAN.
The ID of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Description
Displays the member name information in a Fibre Channel alias (fcalias).
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
fcalias clone
8-11