Islb Abort - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

islb abort

To discard a pending iSCSI Server Load Balancing (iSLB) configuration, use the islb abort command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History Release
3.0(1)
Usage Guidelines
You can use the islb abort command to discard the pending changes to the iSLB configuration and
release the fabric lock. This action has no effect on the active configuration on any switch in the fabric.
The islb abort command can be issued only by the user who started the Cisco Fabric Services (CFS)
session and only on the switch that started the CFS session.
Examples
The following example discards the pending iSLB configuration distribution.
switch# config t
switch(config)# islb abort
Related Commands Command
islb commit
show islb cfs-session
status
show islb pending
show islb pending-diff
clear islb session
OL-18089-01, Cisco MDS NX-OS Release 4.x
islb abort
Modification
This command was introduced.
Description
Commits the iSLB configuration distribution and releases the fabric lock.
Displays iSLB information.
Displays the pending configuration changes.
Displays the differences between the pending configuration and the
current configuration.
Clears a pending iSLB configuration. This command can be issued on any
switch by a user with admin privileges.
Cisco MDS 9000 Family Command Reference
islb abort
11-101