Ivr Copy Active-Zoneset Full-Zoneset - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ivr copy active-zoneset full-zoneset

To copy the active zone set to the full zone set, use the ivr copy active-zoneset full-zoneset command
in EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.0(1)
Usage Guidelines Copying the active zone set to the full zone set may overwrite common zone and zone set configurations
in the full zoning database.
Examples
The following example copies the active zone set to the full zone set.
switch# ivr copy active-zoneset full-zoneset
WARNING: This command may overwrite common zones/zonesets
Please enter yes to proceed.(y/n) [n]?
Related Commands Command
ivr copy active-topology
user-configured
topology
ivr copy auto-topology
user-configure topology
show ivr zoneset active
OL-18089-01, Cisco MDS NX-OS Release 4.x
ivr copy active-zoneset full-zoneset
Modification
This command was introduced.
in the IVR full zoneset database
Description
Copies the active inter-VSAN routing (IVR) VSAN topology to the user
configured topology.
Copies the automatically discovered inter-VSAN routing (IVR) VSAN
topology to the user configured topology.
Displays the active IVR zone set.
ivr copy active-zoneset full-zoneset
Cisco MDS 9000 Family Command Reference
11-125