Show Npv Internal Info - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show npv internal info

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show npv internal info
To display internal N Port Virtualization (NPV) information, use the show npv internal info command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
3.2(1)
Usage Guidelines
None.
Examples
The following example displays the NPV internal information.
switch# show npv internal info
NPV Globals:
============
NPV mode: ENABLED
Switch-Name: 209.165.200.226
Switch Mgmt IP Address: 209.165.200.226
proxy logo Retries: 1
Internal FLOGI max timeout Retries: -1
NS Registration max timeout Retries: 5
timer group handle: 0x30038fe0
Number of Active External Interfaces: 0
External Interface Info:
========================
Interface Information:
ifindex: fc1/1, VSAN: 1, internal FLOGI fcid: 0x1e0000
FSM current state: NPIVP_EXT_IF_ST_FLOGI_FAILED
Internal FLOGI Fail Reason: Mismatch in VSAN for this upstream port
fabric pwwn: 20:05:00:05:30:00:ca:16, fabric nwwn: 20:0a:00:05:30:00:ca:17
my pwwn: 20:01:00:05:30:01:71:b8, my nwwn: 20:01:00:05:30:01:71:b9
Port Parameters:
Rx B2B Credits: 16, Multiplier: 0, Buff Size: 2112
Tx B2B Credits: 16, Multiplier: 0, Buff Size: 2112, bbscn: 0
bbscn_capable: TRUE bbscn_max: 14, port_bbscn: 0
Timer & Retry Information:
Busy Timer
Fail Retry Timer
FDISC Response Timer
Error Clear Timer
Statistics:
Cisco MDS 9000 Family Command Reference
22-292
show npv internal info
Modification
This command was introduced.
(1), id: 21045, active: FALSE time remaining: 0
(7), id: 4209, active: TRUE time remaining: 1
(2), id: 00, active: FALSE time remaining: 0
(6), id: 71, active: TRUE time remaining: 433
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x