Cut-Through Mode; Hostname - Dell PowerConnect 8024 Cli Reference Manual

Example
console#clear power average

cut-through mode

Use the cut-through mode command to enable the cut-through mode on the switch. The mode
takes effect on all ports on next reload of the switch. To disable the cut-through mode on the
switch, use the no form of this command.
Syntax
cut-through mode
no cut-through mode
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
No specific guidelines.
Example
console(config)#cut-through mode
The mode (enable) is effective from the next reload of
Switch/Stack.

hostname

Use the hostname command in Global Configuration mode to specify or modify the switch host
name. To restore the default host name, use the no form of the command.
Syntax
name
hostname
no hostname
name — The name of the host. (Range: 1–255 characters)
•
1071
System Management Commands