Dell PowerConnect 6224 Command Line Interface Manual page 234

Field
Status
Actions
Maximum
Trap
Frequency
show ports security addresses
Use the show ports security addresses command in Privileged EXEC mode to
display current dynamic addresses in locked ports.
Syntax
show ports security addresses {ethernet
number
}
interface — Valid Ethernet port
•
port-channel-number — Valid port-channel number
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example displays dynamic addresses for port channel number
1/g1.
234
Address Table Commands
Description
The status can be one of the following: Locked
or Unlocked.
Action on violations.
The maximum addresses that can be associated
on this port in Static Learning mode or in
Dynamic Learning mode.
Indicates if traps would be sent in case of
violation.
The minimum time between consecutive traps.
interface
|port-channel
port-channel-