Isdp Advertise-V2; Isdp Enable - Dell PowerConnect 6224 Command Line Interface Manual

Example
console#clear isdp table

isdp advertise-v2

The isdp advertise-v2 command enables the sending of ISDP version 2
packets from the device. Use the "no" form of this command to disable
sending ISDP version 2 packets.
Syntax
isdp advertise-v2
no isdp advertise-v2
Default Configuration
ISDP sends version 2 packets by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#isdp advertise-v2

isdp enable

The isdp enable command enables ISDP on the switch. User the "no" form
of this command to disable ISDP. Use this command in global configuration
mode to enable the ISDP function on the switch. Use this command in
interface mode to enable sending ISDP packets on a specific interface.
Syntax
isdp enable
no isdp enable
239
CDP Interoperability Commands