Dell PowerConnect 6224 Command Line Interface Manual page 229

Syntax
show bridge address-table count [vlan
port-channel-number
channel
vlan — Specifies a valid VLAN, such as VLAN 1
•
interface — Specifies a valid Ethernet port
•
port-channel-number — Specifies a valid port-channel-number
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the addresses in the Forwarding Database:
console#show bridge address-table count
Capacity: 8192
Used: 109
Static addresses: 2
Secure addresses: 1
Dynamic addresses: 97
Internal addresses: 9
show bridge address-table static
Use the show bridge address-table static command in Privileged EXEC mode
to display static entries in the bridge-forwarding database.
vlan
|ethernet
]
Address Table Commands
interface-number
|port-
229