Dell PowerConnect 6224 Command Line Interface Manual page 225

Command Mode
Interface Configuration (VLAN) mode
User Guidelines
If routers exist on the VLAN, do not change the unregistered multicast
drop
addresses state to on the routers ports.
NOTE:
Do not use the bridge multicast forbidden forward-unregistered command
with the bridge multicast forward-unregistered command on the same interface.
Example
The following example displays how to enable forwarding of unregistered
multicast addresses.
console(config-if-vlan1)#bridge multicast forward-
unregistered
clear bridge
Use the clear bridge command in Privileged EXEC mode to remove any
learned entries from the forwarding database.
Syntax
clear bridge
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, the bridge tables are cleared.
225
Address Table Commands