Monitoring Subscriber Policies - Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Link Layer Configuration Guide

Monitoring Subscriber Policies

You can use the show subscriber-policy command to display the rules for all
subscriber policies configured on your router or for a specified subscriber policy.
show subscriber-policy
452
Monitoring Transparent Bridging
In Octets:
In Frames:
In Discards:
In Errors:
Out Octets:
Out Frames:
Out Discards: 0
Out Errors:
queue 0: traffic class best-effort, bound to bridge
FastEthernet9/1.1
Queue length 0 Bytes
Forwarded packets 0, Bytes 0
Dropped committed packets 0, Bytes 0
Dropped conformed packets 0, Bytes 0
Dropped exceeded packets 0, Bytes 0
Example 2 Uses the brief keyword to display a summary of all bridge interfaces
configured on the router
host1#show bridge westford01 interface brief
Interface
----------------- --------
FastEthernet9/1.1
FastEthernet9/1.2
FastEthernet9/3.1
ATM11/0.5
ATM11/3.2
ATM11/0.7
See show bridge interface.
Use to display the set of forwarding and filtering rules for all default and
nondefault subscriber policies configured on the router or for a specified
subscriber policy.
For all packet types except Relearn, the command displays permit to indicate
that the bridge interface forwards the packets, or deny to indicate that the bridge
interface filters the packets. (For information about the meaning of permit and
deny for Relearn, see the field descriptions.)
Field descriptions
Subscriber Name of the subscriber policy
ARP Specifies how the bridge interface handles ARP packets
Broadcast Specifies how the bridge interface handles broadcast packets
Multicast Specifies how the bridge interface handles multicast packets
0
0
0
0
0
0
0
Port Status
------------
1 Up
2 Up
3 Up
4 Up
5 Up
6 Up