Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 595

show vlan subinterface
Example 4 Displays profile configuration information related to IPv6 Neighbor
Discovery router advertisement
host1#show profile name ipv6Profile
IPv6 Unnumbered interface
IPv6 Router
IPv6 Src-Addr Validation
IPv6 Administrative MTU
IPv6 ND Enabled
IPv6 ND ManagedConfig
IPv6 ND OtherConfig
IPv6 ND SuppressRa
IPv6 ND RaInterval
IPv6 ND RaLifeTime
IPv6 ND ReachableTime
IPv6 ND RaPrefix
IPv6 ND ValidLifetime
IPv6 ND PreferredLifetime
IPv6 ND PrefixOnLink
IPv6 ND PrefixAutoConfig
IPv6 http redirect Url
See show profile.
Use to display configuration and status information for a specified VLAN
subinterface or for all VLAN subinterfaces configured on the router.
Use the summary keyword to display only the counts of all VLAN subinterfaces
and VLAN major interfaces configured on the router.
Use the vlan or svlan keywords to display information about specific VLAN IDs
or S-VLAN IDs.
Field descriptions
Interface Type and specifier of the VLAN subinterface
Status Status of the VLAN subinterface: up, down, dormant,
lowerLayerDown, absent
MTU Maximum allowable size (in bytes) of the MTU for the VLAN
subinterface
Svlan Id S-VLAN ID value, if configured
Vlan Id VLAN ID value for the VLAN subinterface
Ethertype S-VLAN Ethertype value, if configured
Type Type of VLAN subinterface
Static VLAN or S-VLAN subinterface was configured statically
Dynamic VLAN or S-VLAN subinterface was configured dynamically
Auto configure interface(s) Types of dynamic upper interfaces configured
with the auto-configure command: IP or PPPoE
Monitoring Upper-Layer Dynamic Interfaces and Profiles
Chapter 15: Configuring Dynamic Interfaces
: loopback 0
: default
: Disabled
: 0
: Enabled
: Disabled
: Enabled
: Disabled
: 50
: 1800
: 0
: 1234::/64
: 60
: 60
: Enabled
: Enabled
: http://www.google.com
565