Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 479

show bridge table
Dropped conformed packets, Bytes Number of conformed packets and
bytes that were dropped
Dropped exceeded packets, Bytes Number of exceeded packets and
bytes that were dropped
Using the brief keyword displays the following fields:
Port Bridge group port number on which this interface resides
Interface Interface type and specifier associated with the port (for
example, ATM3/3.1)
Status Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
Example 1 Displays configuration, statistics, and status information for all ports
currently associated with the bridge group
host1#show bridge westford01 port 1
ATM3/3.1
Port Number: 1
Operational Status: LowerLayerDown
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Subscriber
Statistics:
In Octets:
In Frames:
In Discards:
In Errors:
Out Octets:
Out Frames:
Out Discards: 0
Out Errors:
queue 0: traffic class best-effort, bound to bridge
Queue length 0 Bytes
Forwarded packets 0, Bytes 0
Dropped committed packets 0, Bytes 0
Dropped conformed packets 0, Bytes 0
Dropped exceeded packets 0, Bytes 0
Example 2 Uses the brief keyword to display summary information for each
port
host1#show bridge westford01 port brief
Port Interface
------ -------------------------
1 ATM3/3.1
See show bridge port.
Chapter 13: Configuring Transparent Bridging
0
0
0
0
0
0
0
Status
------------
LowerLayerDown
Monitoring Transparent Bridging
ATM3/3.1
449