Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 410

JUNOSe 11.0.x Link Layer Configuration Guide
show profile
380
Monitoring PPPoE
host1:01#show pppoe subinterface summary
Total PPPoE subinterfaces: 116
Administrative Status:
Up: 115
Down: 1
Operational Status:
Up: 115
Down: 1
LowerLayerDown: 1
NotPresent: 0
See show pppoe subinterface.
Use to display information about profiles.
To display information about a specific profile, use the name keyword.
To display a list of profiles configured on the router, use the brief keyword.
Field descriptions
Profile Name of the profile that is displayed
IP address IP address and subnet mask of the interface, or none if the
interface is unnumbered
Unnumbered interface Specifier for the unnumbered interface, or none if
the interface is numbered
Router Name of the virtual router (VR) assigned to the profile; interfaces
created by the profile are attached to this VR
Directed Broadcast Enabled or disabled
ICMP Redirects Enabled or disabled
Access Route Addition Enabled or disabled
Network Address Translation Enabled or disabled; domain location (inside
or outside)
Source-Address Validation Enabled or disabled
Ignore DF Bit Enabled or disabled
Filter Option Packets Router filters out packets with IP options; enabled or
disabled
Administrative MTU MTU size configured on the profile
TCP MSS value Maximum segment size for TCP SYN packets traveling
through the interface
Inactivity Timer Inactivity timer setting; enabled or disabled