Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 156

JUNOSe 11.0.x Link Layer Configuration Guide
show frame-relay lmi
126
Monitoring Frame Relay
In frames: 1233
In errors: 0
In discards: 0
In unknown protos: 0
Frame relay interface 3/2:3/1, status is up
Description: chicago03
Time since last status change 01:20:38
In bytes: 19696
In frames: 1231
In errors: 0
See show frame-relay interface.
Use to display configuration and state information and statistics about the LMI
for a multilink Frame Relay, POS, serial, or GRE tunnel interface.
Optionally, you can specify an interface using the interface type and specifier.
For more information, see Interface Types and Specifiers in JUNOSe Command
Reference Guide.
Use the optional delta keyword to specify that baselined statistics are to be
shown.
Field descriptions
This command displays both DTE and DCE fields for NNI.
For the DTE:
Enquiries sent Total number of LMI status enquiries sent by the DTE
on this interface
Full enquiries sent Total number of LMI full-status enquiries sent by
the DTE on this interface
Enquiry responses received Total number of LMI full- and regular-status
responses received by the DTE on this interface
Full enquiry responses received Total number of LMI full-status
responses received by the DTE on this interface
Async updates received Total number of LMI asynchronous updates
received by the DTE on this interface
Unknown messages received Total number of unknown LMI messages
received on this interface
Loss of sequencing detected Total number of times a loss of sequencing
in received LMI messages was detected by the DTE on this interface
No response timeouts Total number of times a timeout occurred without
receiving a response to an LMI request by the DTE on this interface
Last sequence number sent Last sequence number sent on this interface
Last sequence number received Last sequence number received on
this interface
Out frames: 1233
Out errors: 0
Out discards: 0
Out bytes: 60744
Out frames: 1231
Out errors: 0