Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 331

PPP multilink member-interface serial 2/1:3/1 is up
Time since last baseline 00:00:30
Interface statistics
2 mlppp interfaces found
show ppp interface mlppp
packets
octets
errors
discards
Use to display information about MLPPP interfaces.
You can display a great variety of information with this complex command. See
the show ppp interface command in "Configuring Point-to-Point Protocol" on
page 227, for more detailed information about the display options.
Use the show ppp interface command to display information about all PPP
interfaces, including MLPPP interfaces.
Field descriptions
PPP interface mlppp Name and administrative status (up or down) for an
MLPPP bundle
PPP multilink member-interface Interface type, interface specifier, and
administrative status (up or down) for an MLPPP member link
Network interface administrative status Indicates whether the interface for
the MLPPP bundle is administratively enabled (open), meaning that the no
ppp shutdown command is operational, or administratively disabled (closed),
meaning that the ppp shutdown command is operational
Link interface administrative status Indicates whether the interface for the
member link is administratively enabled (open), meaning that the no ppp
shutdown command is operational, or administratively disabled (closed),
meaning that the ppp shutdown command is operational
Configured network protocol Network protocol configured on the interface
Fragmentation and reassembly configuration:
Link interface fragmentation Indicates whether MLPPP fragmentation
is enabled or disabled on the link interface
Link interface fragment size MLPPP fragment size, in octets, currently
in use on the link interface
Link interface reassembly Indicates whether MLPPP reassembly is
enabled or disabled on the link interface
Link interface administrative MRRU Administrative MRRU value, in
octets, currently in use on the link interface
Baseline status Indicates whether a statistics baseline has been set
Interface statistics:
packets Number of packets received (in) and sent (out) on the interface
octets Number of octets received (in) and sent (out) on the interface
Chapter 8: Configuring Multilink PPP
in out
0 0
125 132
0 0
0 0
Monitoring MLPPP
301