Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 672

JUNOSe 11.0.x Link Layer Configuration Guide
642
Monitoring Dynamic Interfaces and Profiles
Example 1 Displays information about base profile assignments and overriding
profile assignments for all bulk-configured VC ranges on the router. The VC range
named test consists of a single VC subrange (1, 1, 101, 200), has a base profile
named atm1483BaseProfile assigned, and has an overriding profile named
overrideProfile1 assigned to two ATM PVCs within the VC subrange. The VC
range named test2 is a placeholder range that has no VC subranges configured
and no base profile assigned.
host1#show atm bulk-config
Bulk
Config Start End Start End
Interface Name
------------ ------ ----- --- ----- --- ------------------ -----
ATM AAL5 3/0 test
ATM AAL5 3/2 test2
2 bulk configuration(s) found
Profile override(s):
Bulk
Config
Interface Name VPI VCI Assigned Profile Status
------------ ------ --- --- ---------------- ------
ATM AAL5 3/0 test
ATM AAL5 3/0 test
2 profile override(s) found
Example 2 Displays information about base profile assignments and overriding
profile assignments for all VC ranges configured on a specified ATM AAL5
interface
host1#show atm bulk-config atm 3/0
Bulk
Config Start End Start End
Interface Name
------------ ------ ----- --- ----- --- ------------------ -----
ATM AAL5 3/0 test
1 bulk configuration(s) found
Profile override(s):
Bulk
Config
Interface Name VPI VCI Assigned Profile Status
------------ ------ --- --- ---------------- ------
ATM AAL5 3/0 test
ATM AAL5 3/0 test
2 profile override(s) found
Example 3 Displays information about base profile assignments and overriding
profile assignments for a particular bulk-configured VC range
VPI VPI VCI VCI Assigned Profile
1 1 101 200 atm1483BaseProfile
-- -- --- --- none assigned
1 151 overrideProfile1 Active
1 161 overrideProfile1 Active
VPI VPI VCI VCI Assigned Profile
1 1 101 200 atm1483BaseProfile
1 151 overrideProfile1 Active
1 161 overrideProfile1 Active
Admin
State
up
---
Admin
State
up