Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 335

For e series broadband services routers - link layer configuration
Hide thumbs Also See for JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010:
Table of Contents

Advertisement

NOTE: The command displays a value of "none" for any negotiated option parameters
if the option was not negotiated.
OSINLCP protocol configuration:
configured OSINLCP is configured on this interface (true or false)
administrative-status OSINLCP administrative status (open or closed)
OSINLCP protocol status:
operational-status OSINLCP operational status (up, down, not present,
or not present no resources)
terminate-reason Reason for termination of OSINLCP service
OSINLCP negotiated options
npdu-alignment Negotiated NPDU alignment for the local and remote
(peer) side of the link
Example 1 Displays information about the MLPPP member links configured in
bundle group1
host1#show ppp interface mlppp group1 members
PPP interface mlppp group1 is up
PPP multilink member-interface serial 2/0:1/1 is up
PPP multilink member-interface serial 2/0:2/1 is up
PPP multilink member-interface serial 2/0:3/1 is up
Example 2 Displays information about all MLPPP member links configured for
all bundles
host1#show ppp interface mlppp members
PPP interface mlppp group1 is up
PPP multilink member-interface serial 2/0:1/1 is up
PPP multilink member-interface serial 2/0:2/1 is up
PPP multilink member-interface serial 2/0:3/1 is up
PPP interface mlppp group2 is up
PPP multilink member-interface serial 2/1:1/1 is up
PPP multilink member-interface serial 2/1:2/1 is up
PPP multilink member-interface serial 2/1:3/1 is up
PPP interface mlppp group3
No member-interfaces found
Example 3 Displays information about all MLPPP encapsulated links, regardless
of whether the links are members of an MLPPP bundle
host1#show ppp interface mlppp links
PPP multilink interface serial 2/0:1/1 is up
PPP multilink interface serial 2/0:2/1 is up
PPP multilink interface serial 2/0:3/1 is up
PPP multilink interface serial 2/1:1/1 is up
PPP multilink interface serial 2/1:2/1 is up
PPP multilink interface serial 2/1:3/1 is up
Chapter 8: Configuring Multilink PPP
Monitoring MLPPP
305

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Junose 11.0.x

Table of Contents