Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 590

For e series broadband services routers - link layer configuration
Hide thumbs Also See for JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010:
Table of Contents

Advertisement

JUNOSe 11.0.x Link Layer Configuration Guide
560
Monitoring Upper-Layer Dynamic Interfaces and Profiles
PPP Authentication Type of authentication configured: PAP, CHAP, or none
PPP Authentication Router Name of authentication virtual router
PPP Negotiate MRU MRU configured for the profile
PPP Packet Log Enabled or disabled
PPP State Log Enabled or disabled
PPP Chap Challenge Length Minimum and maximum Chap Challenge
length
PPP Passive Mode Enabled or disabled
PPP Multilink Enabled or disabled
PPP IPCP Netmask Option Enabled or disabled
PPP IPCP Lockout Option Enabled or disabled
PPP Max-negotiations IPCP Maximum number of renegotiation attempts
that the router accepts before terminating a PPP session
PPP AAA Profile AAA profile associated with this PPP interface
PPP Multilink Fragmentation Enabled or disabled
PPP Multilink Fragment Size Multilink fragment size for this PPP interface
PPP Multilink Reassembly Enabled or disabled
PPP Multilink Mrru Multilink MRRU value for this PPP interface
PPP Hash Link Selection
enabled or disabled
PPP Initiate IP Initiation of IPv4 over this PPP interface; enabled or disabled
PPP Initiate IPv6 Initiation of IPv6 over this PPP interface; enabled or
disabled
PPP IPCP prompt-option dns Prompts the CPE (Customer Premises
Equipment) to negotiate the IPCP primary and secondary DNS options that
are locally available with the broadband remote access server; enabled or
disabled
PPPoE Max Sessions Maximum number of PPPoE subinterfaces that can
be on an interface
PPPoE Always-offer Router offers to set up a session for the client, even if
the router has insufficient resources to establish a session; enabled or disabled
PPPoE Remote-Circuit-Id The router captures and processes a
vendor-specific tag containing a remote circuit ID transmitted from a digital
subscriber line access multiplexer (DSLAM); enabled or disabled
PPPoE Log PPPoeControlPacket Enabled or disabled
Hash-based link selection for a PPP interface;

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.0.x

Table of Contents