Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual page 135

show atm vp-description
show atm vp-tunnel
OutOamF4SegmentLoopbackCells
OutOamF4SegmentLoopbackCommands
OutOamF4SegmentLoopbackResponses :0
OutOamF4SegRdiCells
OutOamF4SegCCActDeActCells
OutOamF4SegCCCells
Time since last status change
VP Description: ATM-12/0-VPI-1
See show atm vp.
Use to display VP descriptions configured using the atm vp-description
command.
To display all VP descriptions configured on the router, issue the command
without an ATM identifier or VPI number (Example 1).
To display all VP descriptions for a particular ATM interface, specify the ATM
interface identifier without the VPI number (Example 2).
To display the VP description for a particular VPI, specify both the ATM interface
identifier and the VPI number (Example 3).
Field descriptions
Interface ATM interface identifier
VPI Virtual path identifier
Description Text description configured for the VP
Example 1 Displays all VP descriptions configured on the router
host1#show atm vp-description
Interface VPI Description
ATM 2/0 0 atm20Vpi0Subscribers
ATM 2/0 1 atm20Vpi1Subscribers
ATM 2/1 0 atm21Vpi0Subscribers
Example 2 Displays all VP descriptions for the specified ATM interface
host1#show atm vp-description atm 2/0
Interface VPI Description
ATM 2/0 0 atm20Vpi0Subscribers
ATM 2/0 1 atm20Vpi1Subscribers
Example 3 Displays the VP description for the specified VPI
host1#show atm vp-description atm 2/0 1
Interface VPI Description
ATM 2/0 1 atm20Vpi1Subscribers
See show atm vp-description.
Chapter 1: Configuring ATM
:0
:0
:0
:0
:0
:08:48:44
Monitoring ATM
105