Monitoring The Src Client Version Number; Monitoring Subscriber Information - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Related Topics

Monitoring the SRC Client Version Number

Purpose
Action
Related Topics

Monitoring Subscriber Information

Purpose
Copyright © 2010, Juniper Networks, Inc.
Table 31: show sscc statistics Output Fields (continued)
Field Name
Connection Closed remotely
Create Interfaces sent
Delete Interfaces sent
Active IP Interfaces
IP Interface Transitions
Synchronizes received
Synchronize Complete sent
Internal Errors
Communication Errors
show sscc statistics
Display the SRC client (formerly SDX client) version number.
To display the SRC client version number:
host1#show sscc version
The SSC Client version is: 4.0
show sscc version
Display the active subscribers on the router. If you specify a username, the router displays
only the users that match. When you issue the command in the default VR, all users are
displayed. When you issue the command in a nondefault VR, only those users attached
to that VR are displayed. The following list describes keywords that you can use with the
show subscribers command:
Chapter 2: Monitoring and Troubleshooting Remote Access
Field Description
Number of connections that were closed by the
remote SAE
Number of create interface indications sent to the
SAE
Number of delete interface indications sent to the
SAE
Current number of active IP interfaces the SRC client
is aware of
Number of IP interface transitions logged by the SRC
client
Number of synchronization requests the SRC client
received from the SAE
Number of synchronization complete indications sent
Number of internal errors
Number of errors with lower-layer communications
(such as socket errors)
151