Adding And Importing A Junos Device With A Dynamic Ip Address - Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.
The next step is to verify the imported configuration using the Device Monitor or the
Device Manager. See "Verifying Imported Device Configurations" on page 128 for details.

Adding and Importing a Junos Device with a Dynamic IP Address

The procedure for importing a device with an unknown IP address is similar for all Junos
devices. This procedure requires specific actions to be taken on the device in addition to
those taken in the NSM UI.
The following sections explain how to add a Junos device:
Install and Configure a Junos Device on page 125
Add the Device in NSM on page 125
Configure and Activate Connectivity on a Junos Device on page 126
Confirm Connectivity and Import the Device Configuration into NSM on page 127
Install and Configure a Junos Device
Before you can add a Junos device to NSM, the device must be installed and configured,
and logon credentials for an NSM administrator must be configured for it. Perform the
following steps:
Connect the device to the network and configure one of the interfaces so that the
1.
device can reach the NSM device server.
Add a user for NSM that has full administrative rights.
2.
For complete details on installing and configuring Junos devices, see the documentation
for the specific device,
Add the Device in NSM
To add the device in the NSM UI, follow these steps:
From the domain menu, select the domain in which you want to import the device.
1.
In Device Manager, select Devices.
2.
Click the Add icon and select Device to open the Add Device wizard.
3.
Select Device Is Not Reachable, and then click Next.
4.
On the Specify Name, Color, OS Name, Version, and Platform screen:
5.
Enter a name and select a color to represent the device in the UI.
From the OS Name list, select
The Junos OS Type list appears.
Select the Junos OS type for the device you want to add:
To add a J Series or SRX Series device or an SRX virtual chassis, select J/SRX
Series from the list.
To add an EX Series device or virtual chassis, select EX Series.
To add an M Series or MX Series device, select M/MX Series.
Junos .
Chapter 4: Adding Devices
125